The casting of Liquid aluminum

 

    The casting of liquid aluminum

Micro flow meter

Porter:shcixi_ru

  The casting process of aluminum ingots is so strict.Generally,It's a continuous vertical casting.By  injecting the liquid aluminum into the mold while injecting the cooling water into the casting,the liquid aluminum flow into mold and cool down on the base.The whole process is when the liquid aluminum condensation and at the same time to reduce the base height to produce the aluminum ingots.In the produce process, we need to removed the oxide and scum on the surface of aluminum ingots.

  In the process,the most important step is to control the speed of injected same as the condensation speed of aluminum.If the inject speed more than condensation speed ,then the liquid aluminum would flow into model lead to failure.In addition,if the inject speed is slowly,It would increase the casting time and cost.

  Using the JSN micro flow meter,you could precise control the inject speed ,The JSN micro flow meter with the oval gear principle.The highest accuracy is 0.2% if the viscosity in a ideal state.Moreover,the min flow rate of micro flow meter is 0.3ml/min and suitable for much application.

  Note:The aluminum casting with a high temperature environment.The JSN micro flow meter with all stainless steel 316L and high repeatability to keep the working life and accuracy.If you would like to purchase a sample to test,Pls let us know.

oval gear flow meter

Oval gear flow meter

Porter:sales@gnflowmeter.com

Site:www.microflowmeter.com

Skype:shcixi_ru

  CX-OGFM-LCD Digital Oval Gear Flow Meter is a volumetric flowmeter is the most common one. It has a long history, widely used in petroleum, chemical, food, shipbuilding, pharmaceutical, paper and other industries. Medium viscosity range for the various measurements. Especially suitable for measuring low viscosity media. There are two kinds of mechanical counter and electronic counter

  Digital Oval Gear Flow Meter is a positive displacement meter for precise measurement of continuous or intermittent flow or instantaneous flow pipeline liquid. It is particularly suitable for flow measurement of heavy oil, polyvinyl alcohol, resins and other high viscosity media.

  oval gear flow meter is measured by the housing and a pair of upper and lower rotor gear cover and other components, known volume of the cavity between them as a measuring unit of the flowmeter. Rotor gear by slight pressure at the inlet to promote its rotation, and continue to import liquid after metering chamber to the outlet. Transfer according to the number of rotations of the rotor to the counter (second table), indicating traffic

Model Item	LC-A cast iron		LC-E cast		LC-B stainless
P(mpa)	1.0   1.6		2.5  4.0  6.4		1.0   1.6
Tested liquid viscosity	2~8  mpa.s
Mesaured temperature of the liquid	-20℃~+100℃
Flow range m3/h
Model Nominal size	LC-A cast iron		LC-E cast		LC-B stainless
	0.5 class	0.2 class	0.5 class	0.2 class	0.5 class	0.2 class
10	0.08~0.4	0.1~0.4	0.08~0.4	0.1~0.4	0.1~0.5	0.1~0.5
15	0.25~1.5	0.5~1.5	0.25~1.5	0.5~1.5	0.5~1.5	0.5~1.5
20	0.5~3	0.6~3	0.5~3	0.6~3	0.6~3	0.6~3
25	1~6	1.2~6	1~6	1.2~6	1.2~6	1.2~6
40	2.5~15	3~15	2.5~15	3~15	3~15	3~15
50	4~24	4.8~24	4~24	4.8~24	4.8~24	4.8~24
80	10~60	12~60	10~60	12~60	12~60	12~60
100	16~100	20~100	16~100	20~100	20~100	20~100
150	32~190	38~190	32~190	38~190	38~190	38~190
200	34~340	68~340	34~340	68~340	68~340	68~340

CX Turbine flow meter

Turbine Flow meter

Porter:sales9@gnflowmeter.com

Site:www.microflowmeter.com

        

               

This manual contains the standard technique specification, model, installation, operation and maintainment of CX-LTFM turbine flowmeter. Please read the manual before using the meter. But there are neither different features of different users nor technique specification of every time or structure because some amendments will not affect the function and operation of the meter.

Model CX-LTFM turbine flowmeter adapts to measure the liquid rate and total flowrate of low viscosity. It can be widely used in the fields of Petrol, Chemical industry, Metallurgy, Scientific research for measuring or control.

Several output and display methods can be selected (detailed in the table of model code).

The executed standard number of the product is：ZB N12 005-1989

Parameters:

Nominal Diameter DN(mm)	Range(m3/h)						Liquid Temperature (℃)	Nominal Pressure PN(MPa)	Ambient Temp. (℃)	Max. Pressure Loss (MPa)
	Error   0.2%*		Error    0.5%		Error      1%
	Min.	Max.	Min.	Max.	Min.	Max.
2*					0.03	0.16	-20  to +120	6.3	-25 to +55	0.15
4*					0.04	0.25				0.12
6			0.1	0.6	0.1	0.6		6.3 16 25 32*		0.08
10			0.25	1.2	0.2	1.2				0.05
15	1.2	6	0.6	4	0.6	6				0.035
25	2	10	1.6	10	1	10
40	4	20	3	20	2	20		1.6 2.5		0.025
50	6	40	4	40	4	40
80	16	100	10	100	10	100
100	25	160	20	160	20	200		1.6 2.5
150	50	300	40	300	40	400
200	150	750	100	600	80	800
250*	200	1000	160	1000	120	1200		1.6
300*			260	1600	180	1800